Mercedes-Benz Wallbox with fixed charging cable, Australia/New Zealand/Thailand
black, Mercedes-Benz
A0009063112
A$2,475.00
(Inclusive of GST) Charge your electrified Mercedes-Benz at home in style and with ease at the Mercedes-Benz Wallbox. With a charging power of up to 22 kW , 6-metre cable length and the universal type-2 plug, you can charge your vehicle safely and significantly faster than at a household socket
Product details
Charge your electrified Mercedes-Benz vehicle stylishly and easily at home with the new Mercedes-Benz Wallbox 2.0. With a maximum charging power of up to 22 kW*, 6 metres of cable length and a type-2 connector, the wallbox can charge your electric vehicle safely and significantly faster than a household socket.
Safety is the highest priority
During the charging process, the 6mA DC fault current detector installed in your Mercedes-Benz Wallbox 2.0 protects your Mercedes-Benz vehicle, your home installation system and your wallbox. In addition, the Mercedes-Benz Wallbox 2.0 can be unlocked or blocked via the Mercedes me App to protect it from unauthorised use. An RFID card is available with part number A0009056519. Card available separately.
Always up to date
The Mercedes-Benz wallbox can carry out software updates "over-the-air" via the customer's own compatible WLAN/LAN.
Installation
The new Mercedes-Benz Wallbox 2.0 (part number A0009063112) requires an active electrical connection and may not be suitable for installation at all locations. Before purchasing, please check compatibility with a professional wallbox installer.
The installation of this item must be carried out exclusively by persons with appropriate specialist training and the item is not intended for installation by the end user. Please also observe the local rules and regulations.
Compatibility
The Mercedes-Benz wallbox has been tested for compatibility and functioning with all current Mercedes-Benz models. The wallbox was developed according to the official IEC 61851-1 standard and can therefore also be used with other vehicles that comply with this standard.
Components
Mercedes-Benz wallbox, operating instructions, installation instructions, wall bracket, screws.
Electrical power
Maximum charging power: up to 22 kW*
Max. output power: 1-phase or 3-phase, 230-400 V, 6-32 A
Charging mode: mode 3 (IEC 61851)
Interfaces
Connections: hard-wired type-2 cable (6 m)
Measurement and connectivity
Measurement: accuracy ±2%
Connectivity: Ethernet, Wi-Fi
Communication protocol: OCPP 2.0.1
Safety features
Electrical safety: 6mA DC leak detection
Environmental characteristics
Water protection rating: IP55/IK10
Physical properties
Installation: wall or mast
Housing: polycarbonate
Product dimensions: 250 x 366 x 176 mm (W x H x D)
Product weight: 6.6 kg
*Charging at 22 kW requires the use of 3-phase AC current. The use of single-phase current has a maximum charging power of 7.2 kW. Charging may vary and is influenced by many additional factors, such as the DNSP regulation, the load, the charging power of the vehicle, the traffic, the ambient temperature (maximum operating capacity of 50 degrees Celsius) as well as the capability and condition of the vehicle/battery.
**Use of the remote functions of the Mercedes Benz Wallbox requires the Mercedes me App, a personal Mercedes me ID and agreement to the terms of use for the Mercedes me connect services.
Charge your electrified Mercedes-Benz vehicle stylishly and easily at home with the new Mercedes-Benz Wallbox 2.0. With a maximum charging power of up to 22 kW*, 6 metres of cable length and a type-2 connector, the wallbox can charge your electric vehicle safely and significantly faster than a household socket.
Safety is the highest priority
During the charging process, the 6mA DC fault current detector installed in your Mercedes-Benz Wallbox 2.0 protects your Mercedes-Benz vehicle, your home installation system and your wallbox. In addition, the Mercedes-Benz Wallbox 2.0 can be unlocked or blocked via the Mercedes me App to protect it from unauthorised use. An RFID card is available with part number A0009056519. Card available separately.
Always up to date
The Mercedes-Benz wallbox can carry out software updates "over-the-air" via the customer's own compatible WLAN/LAN.
Installation
The new Mercedes-Benz Wallbox 2.0 (part number A0009063112) requires an active electrical connection and may not be suitable for installation at all locations. Before purchasing, please check compatibility with a professional wallbox installer.
The installation of this item must be carried out exclusively by persons with appropriate specialist training and the item is not intended for installation by the end user. Please also observe the local rules and regulations.
Compatibility
The Mercedes-Benz wallbox has been tested for compatibility and functioning with all current Mercedes-Benz models. The wallbox was developed according to the official IEC 61851-1 standard and can therefore also be used with other vehicles that comply with this standard.
Components
Mercedes-Benz wallbox, operating instructions, installation instructions, wall bracket, screws.
Electrical power
Maximum charging power: up to 22 kW*
Max. output power: 1-phase or 3-phase, 230-400 V, 6-32 A
Charging mode: mode 3 (IEC 61851)
Interfaces
Connections: hard-wired type-2 cable (6 m)
Measurement and connectivity
Measurement: accuracy ±2%
Connectivity: Ethernet, Wi-Fi
Communication protocol: OCPP 2.0.1
Safety features
Electrical safety: 6mA DC leak detection
Environmental characteristics
Water protection rating: IP55/IK10
Physical properties
Installation: wall or mast
Housing: polycarbonate
Product dimensions: 250 x 366 x 176 mm (W x H x D)
Product weight: 6.6 kg
*Charging at 22 kW requires the use of 3-phase AC current. The use of single-phase current has a maximum charging power of 7.2 kW. Charging may vary and is influenced by many additional factors, such as the DNSP regulation, the load, the charging power of the vehicle, the traffic, the ambient temperature (maximum operating capacity of 50 degrees Celsius) as well as the capability and condition of the vehicle/battery.
**Use of the remote functions of the Mercedes Benz Wallbox requires the Mercedes me App, a personal Mercedes me ID and agreement to the terms of use for the Mercedes me connect services.
Shipping Height
450 mm
Shipping Length
500 mm
Shipping Width
300 mm
Fine Color
black
Charging Capabilities
- 22 kW charging requires the use of three-phase power. Use of single-phase power has a maximum charging capacity of 7.2kW. Charging is dependent on vehicle and household capabilities and may vary and is influenced by many additional factors such as DNSP regulation, load, vehicles on-board charging capacity, traffic, ambient temperature (maximum operating capacity of 50 degrees celsius) and vehicle/battery capability and condition.
Use of remote functions
- Use of the remote functions of the Mercedes Benz Wallbox 2.0 requires the Mercedes me App and installer app (EVBox Install) on a compatible smart phone device, a Mercedes me account ID and agreement to the relevant terms and conditions for the Mercedes me and Installer App. EvBox Install is a third party and by downloading and using the EVBox Install App the user accepts EVBox’s specific terms and conditions. Mercedes me and the associated digital services vary between vehicles, models and equipment. Data plan required for internet connection. Please visit your local authorised retailer or refer to the Mercedes me terms and conditions for more information including vehicle and device compatibility, connectivity and capability requirements.
- Mercedes me and the associated digital services vary between vehicles, models and equipment. Please visit your local authorised retailer or refer to the current Mercedes me terms and conditions for more information including vehicle and device compatibility, connectivity and capability requirements.
Installation and Important Safety Notice
- Only certified professionals, such as qualified electricians, are allowed to install and maintain wallboxes in Australia. The installing electrician should ensure that the installation is completed in accordance with professional requirements and register the charging device as per the relevant guidelines. It is also important that you choose an electrician who is familiar with the approval requirements for vehicle charging devices and who can support you in obtaining the necessary approval as per relevant electrical guidelines.
- Active Internet connectivity required. Customer is responsible for applicable data internet fees and charges.
Installation partner
- JET Charge is Mercedes-Benz Australia/Pacific Pty Ltd’s professional wallbox installation partner and can be contacted via the following link- Mercedes-Benz – JET Charge.
- JET Charge will review the particular infrastructure and requirements at your installation location and confirm your installation process. An active Internet connection via compatible WLAN, LAN is required for installation.
- Customer is responsible for any fees charged by JET Charge for installation of the Wallbox.
[1] All images shown are for illustrative purposes only and are displayed by way of example. Actual parts and accessories may differ slightly. Please check that the part or accessories’ design, features and technical specifications are available and fit for your vehicle prior to purchase.
[2] Prices shown are inclusive of GST. Additional costs can result from installation, paintwork or required additional part/accessories. Prices are subject to change. Please confirm final cost prior to purchase.